My video is too bright – what’s wrong?

Everything is connected OK, but the video is far too
bright – lighter bits of the image are totally white

If you are using a DA (distribution amp) check that
the termination button is in. If you leave the button out (unterminated) the
video signal will be double its normal amplitude and blow out all the brighter
detail in the image.

Check the settings
on the projector – has someone fiddled with the contrast control (contrast =
white level)?

If you are using a
camera, is the Iris in Manual Iris mode and wide open? Or is there too much gain
applied?

Advertisements

Comments are closed.

%d bloggers like this: